Convenience through innovation and thoughtful design1-800-328-7363 (8:00am ~ 4:30pm PST)www.babytrend.comBaby Trend, Inc.1607 S. Campus Ave., Ontario
175.0 Weight and Height Recommendations5.2 TODDLER CAR SEAT USE (WITH Built-in Harness System) Child MUST meet all of the following requirements
195.0 Weight and Height Recommendations5.4 BACKLESS BOOSTER CAR SEAT USE (WITHOUT Built-in Harness System) Child MUST meet all of the following re
216.1 Overall Considerations for Selecting A Seating Location•Pleasereviewyourvehicleowner’smanualtodeterminethebestlocationforeac
6.2 Seating Locations to Avoid DO NOT use this Car Seat in the following seating locations.•NeverusethisCarSeatinavehicleseatinglocation
7.0 Toddler Car Seat (With Built-in Harness) Installation and Use25The belt path routing used to secure this car seat into a vehicle is dependent on
Installation WITHOUT Top Tether“REAR ENTRY” Belt RoutingThe “REAR ENTRY” belt routing is used to secure the Toddler Car Seat (WITHHarness)wheninsta
3. Route the LATCH lower anchor belt using the “FRONT ENTRY” belt routing as shown in Section 7.2.4. Place Top Tether Strap over the top of th
9. Place knee inside seat and while pressing down, pull on the free end of the LATCH lower anchor belt to tighten the LATCH lower anchor b
To remove car seat:1. Loosen Top Tether by pressing the button on Tether Adjuster and sliding belt through adjuster .2. Unhook Top Tether H
356. If the vehicle seat back is adjustable, adjust into the upright position or the positionspeciedinthevehicleowner’s manual for use wi
1.0 General Warnings and Information...32.0 WARNINGS...
To secure car seat in vehicle:1. Assemble the Back Support (see “Assembly and Removal of Back Support” section).2. Store LATCH connectors on back
7. Pull the vehicle Lap belt out and route through the car seat using the “FRONT ENTRY” belt routing as shown in Section 7.2 and buckle the vehic
The “REAR ENTRY” belt routing must be used when a Top Tether is NOT used to secure this Car Seat.Note: Installation with Top Tether is recommended wh
437.0 Toddler Car Seat (With Built-in Harness) Installation and Use3. Adjust the harness strap height for your child – Harness straps MUST be at
To secure car seat in vehicle:1. Assemble the Back Support (see “Assembly and Removal of Back Support” section).2. Store LATCH and Top Tether by
4. Place the car seat on the vehicle seat in a seating location and centered between the Lap/Shoulder belt anchorages (see “Selecting a Vehicle
497.0 Toddler Car Seat (With Built-in Harness) Installation and UseTo secure car seat in vehicle:1. Assemble of the Back Support (see “Assembly a
517.0 Toddler Car Seat (With Built-in Harness) Installation and Use9. Check for a secure installation by grasping the car seat armrest and pushing
To secure your child: 1. Check that harness straps are through harness slots at or just above child’s shoulders.2. Place child in Car Seat with c
557.0 Toddler Car Seat (With Built-in Harness) Installation and Use4. Snugly adjust harness around your child by pulling the harness adjuster strap
1.0 General Warnings and Information3WARNING TO PARENTS AND CAREGIVERSProper use is required! Even if using this car seat seems easy to gure out, it
57To remove your child: 1. Unbuckle Harness Clip – press on the tabs in the top and bottom of the Harness Clip and pull apart to open t
598.0 Booster Car Seat (Without Built-in Harness) Installation and UseWARNING! DEATH or SERIOUS INJURY can occur: • If child will not keep v
5. If the vehicle seat back is adjustable, adjust into the upright position or the position speciedinthevehicleowner’smanual for use with
638.0 Booster Car Seat (Without Built-in Harness) Installation and Use11. Checktofthevehicleseatbeltsonchild: - Vehicle lap belt mu
7. Pull the vehicle lap/shoulder belt across front of child and buckle vehicle seat belt. - Vehicle shoulder belt on buckle side must be und
678.0 Booster Car Seat (Without Built-in Harness) Installation and Use9.Checktofthevehicleseatbelts on child: - Vehicle lap belt mus
Safe Seat Belt Systems:The following vehicle seat belt systems can be used with the Car Seat provided that all of the other requirements prescribed in
71Unsafe Seat Belt Systems:DO NOT use the following types of vehicle seat belt systems with the Car Seat. These vehicle seat belt systems will not hol
73 Lap Belts Located Forward of Seat Crease: DO NOT use a vehicle seat belt that is anchored on the vehicle seat more than 2 inches forward of t
10.1 Assembly and Removal of Back SupportBefore using your Car Seat in your vehicle, you must assemble the Back Support and prepare the Car Seat harn
5Failure to follow these instructions and Car Seat labels can result in child striking the vehicle’s interior during a sudden stop or crash.• Use thi
10.0 Operation and Adjustments773. Check that the Harness Straps are snugly adjusted. The harness strap is properly tightened if you are not able
10.0 Operation and Adjustments79The harness can be adjusted to four different heights. The proper height of the harness straps is at or just above you
10.0 Operation and Adjustments8110.4 Harness Removal and AssemblyHarness Removal:a. Buckle harness and chest clip to hold harness system together
10.0 Operation and Adjustments83 Harness Assembly:WARNING! • Harness straps must be at or above the child’s shoulders. Failure to properly a
- From back of car seat, pull Harness Straps through the Harness Strap Slots in back support until you have enough strap to reach the Belt Adjuster
To attach vehicle Shoulder Belt Positioner:•AttachingtheShoulderBeltPositioning Clip to backless booster:- Lay Shoulder Positioning Belt Clip o
8911.1 Certications This Car Seat conforms to all Federal Motor Vehicle Safety Standards for use in motor vehicles and aircraft. See use modes b
12.0 Cleaning and Maintenance91 To Remove Head Support Pad: • Slideelasticloopsoutofinnershoulderbeltslot. • Pull pad off head suppor
13.0 Replacement Parts9313.0 Replacement Parts If you need help or replacement parts, please call our Customer Service Department at 1-800-328-7
7• This Car Seat is designed and tested to accommodate a child of a specic range of WEIGHT and HEIGHT. Using the Car Seat for a child whose weig
3.0 Features and Benets3.1 Toddler Car Seat (WITH Built-in Harness System)9Harness StrapCoversToddler Shoulder Belt GuideBodyInsertHarness ClipTodd
3.3 High-back Booster Car Seat (WITHOUT Harness System)Seat BaseArmrestBooster ShoulderBelt Guide11Seat BasePadHead SupportPadArmrestHead SupportBoo
4.0 Preparing Car Seat for Use13The steps to prepare the Car Seat for use with your child are outlined below and described in detail in this owner’s m
4.0 Preparing Car Seat for Use15 164.4 Proper Use Check ListToddler Car Seat (WITH Harness) √ Car seat is securely installed in vehicle. √ The c
Kommentare zu diesen Handbüchern